General Directions for Use:
Shake well. Do not allow people or pets in treated areas until sprays have dried. Remove pets, birds and cover fish aquaria before spraying.
Do not allow spray treatment to drift onto pastureland, cropland, poultry ranges or water supplies. Do not use on crops used for food, forage or pasture. Do not apply by air.
For outdoor applications:
Do not water the treated area to the point of run-off. Do not make applications during rain.
All outdoor applications must be limited to spot or crack-and-crevice treatments only, except for the following permitted uses: treatment to soil or vegetation around structures; applications to lawns, turf, and other vegetation; applications to building foundations, up to a maximum height of 3 feet.
Other than applications to building foundations, all outdoor applications to impervious surfaces such as sidewalks, driveways, patios, porches and structural surfaces (such as windows, doors and eaves) are limited to spot and crack-and-crevice applications, only.
Application is prohibited directly into sewers or drains, or to any area like a gutter where drainage to sewers, storm drains, water bodies, or aquatic habitat can occur. Do not allow the product to enter any drain during or after application.
Mixing instructions: This is an easy-to-apply product that can be used to control nuisance insects. Apply with hand pressurized or power operated sprayers. Carefully measure and mix the amount of product and water as directed. Where appropriate, measure the area to be treated by measuring the length and the width then multiply to determine the square footage of the area. When mixing, fill the application equipment with half of the water first and then measure and add the appropriate amount of Permethrin 10% followed by the remaining water. Shake or stir thoroughly to mix the product and water. Thorough spray coverage is necessary but do not allow run-off.