Hoof Tite is a two part urethane, fast-set adhesive used to bond blocks to bovine hooves. The cartridge can be closed airtight and stored for later use.
Shipping : Flat
Hoof Tite is a two part urethane, fast-set adhesive used to bond blocks to bovine hooves. The cartridge can be closed airtight and stored for later use.
• NO more cutting open cartridges
• Easy on/easy off system
• Replaceable Plug
• Dual Chamber
• Forced Chamber Mixing Tip
• Bonds in 30 Seconds
• Ideal for Rubber & Wooden Blocks
• 1300 PSI strength
• Made in the USA
• No Harmful Odors
| Directions | Treat the injured claw. Then trim the sound claw as flat, clean and dry as possible. Place the Hoof Tite™ cartridge into the applicator gun. Untwist round cap and remove dual plug and place the mixer tip. Slide cap down around the mixer tip and twist cap to secure. Dispense through gun. Replace dual plug and secure with cap. Apply adhesive to wood, plastic or boot blocks. Apply block immediately to prepared sound claw. Hold firmly for 30 seconds do not press glue between hoof and block because the layer of glue may become too thin. After setting, let the cow stand on the block for 2 to 3 minutes before releasing. |
|---|
