Weighing a Patient:
1. Make sure there is nothing on the weighing tray. Press the ON/TARE/OFF button to turn on
the scale. "88.88" will appear on the display followed by zeroes.
2. Place the baby on the scale so that its weight is evenly distributed. The scale will begin to
display weight information and will lock on the patient's weight when the stable weight of the
patient is determined. Depending on the movement of the patient on the scale, it may take
several seconds for the scale to lock onto the weight. When a stable weight is calculated,
the weight reading will flash on the display three times. The weight reading will remain on
the display until the baby is removed from the scale. Caution: To prevent patient injury,
the patient must be attended throughout the entire weighing event.
3. Remove the baby from the scale.
4. To turn off the scale, press and hold the ON/TARE/OFF button for approximately three
seconds.
Note: If the display shows "Err" you have exceeded the capacity of the scale. |