Alpine WSG Water Soluble Granule Insecticide 500gm

Step 1: Inspect the area to see where your target pest is active and note those places as this is where the spray treatment will be focused. Determine how much Alpine WSG Insecticide you will need for application by measuring and multiplying the total length x width of the treatment area to get the square footage. Alpine WSG  is available either in pre-measured packets or water-soluble granules in a bottle. For a 0.1% concentration, Alpine WSG is mixed at a rate of 0.35 oz. in a gallon of water to treat 1,000 sq. ft. For a 0.2% dilution, the rate is 0.70 oz per 1,000 sq. ft. and for 0.3% dilution, the rate is 1.05 oz. per 1,000 sq. ft. Use the higher concentrations for severe infestations or for certain target pests. So for example, if you have 2,000 sq. ft. of measured area to treat and you want a 0.1% ratio, you will need to mix 0.70 oz. of Alpine WSG in 2 gallons of water. 

Step 2: Add about 1/2 of the water to the spray tank. Add the appropriate measured amount of Alpine WSG to the water, then complete filling the spray tank. Agitate the tank until the product is completely dissolved, then you are ready to spray.

Step 3: Apply the Alpine WSG Insecticide spray mixture as a perimeter treatment outdoors (around weep holes, door and window frames, eaves, bushes, foliage etc.) or directly to wasps nests and anthills. Indoors, apply as a crack and crevice application in pest hiding places and points of entry depending on the target pest (void areas, under sinks and refrigerators, carpets, upholstered furniture etc.). Reapply the Alpine WSG spray as needed for continued control every month or so.