Rescue™ Disinfectant Wipes are a one-step disinfectant cleaner, and odor neutralizer designed for general cleaning and disinfecting of hard, non-porous environmental surfaces.
Shipping : Flat
Rescue™ Disinfectant Wipes are a one-step disinfectant cleaner, and odor neutralizer designed for general cleaning and disinfecting of hard, non-porous environmental surfaces. made of a non-woven, meltblown polypropylene wipe material, ensuring even surface coverage and increasing the ability and efficient of AHP for fine particle removal.
| Directions | For Use as a One-Step Cleaner/Disinfectant: 1. Pre-clean heavily soiled areas. 2. Pull towelette from canister and wipe hard, non-porous environmental surfaces. 3. Allow surface to remain visibly wet for 1 minute. 4. Wipe surface dry or allow to air dry. Animal Housing Facilities in Veterinary Clinics and Hospitals For cleaning and disinfecting the following hard non-porous surfaces: feeding and watering equipment, utensils, instruments, cages, kennels, catteries, etc. 1. Remove all animals and feed from premises, animal transportation vehicles, crates, etc. 2. Remove all litter, droppings and manure from floors, walls and surfaces of facilities occupied or traversed by animals. 3. Empty all troughs, racks, and other feeding and watering appliances. 4. Thoroughly clean all surfaces with soap or detergent and rinse with potable water. Pull towelette from canister and wipe hard, non-porous environmental surfaces. 5. All surfaces must remain visibly wet for 1 minute. 6. Allow to air dry. 7. Ventilate building and other closed spaces. 8. Do not house animal or employ equipment until treatment has been absorbed, set or dried. 9. Thoroughly scrub all treated feed racks, mangers, troughs, automatic feeders, fountains, and waterers with soap or detergent, and rinse with potable water before reuse. For Use as a Cleaner and/or Deodorizer Pull towelette from canister and wipe hard, non-porous environmental surfaces. Allow to air dry. To Disinfect Non-Critical, Pre-Cleaned Instruments: 1. Instruments must be thoroughly pre-cleaned to remove excess organic debris, rinsed, and rough dried. 2. Clean and rinse lumens of hollow instruments before wiping with this product. 3. Wipe all surfaces of instruments with this product until thoroughly wet. 4. Let stand for 1 minute. 5. Wipe with a dry, clean cloth and let air dry. Note: Cleaning of critical and semi-critical devices must be followed by an appropriate terminal sterilization/high-level disinfection process.
|
|---|
