Speedy Dryer V-100X (Extra Heat) Professional Grooming Stand Dryers with Adjustable Stand

PLEASE KEEP IN MIND:

• Read all instructions before using appliance.

To protect against electrical hazards, do not immerse in water or any other liquid and do not use while bathing.

• Close supervision is necessary when any appliance is used near children.
• Unplug the appliance from the outlet when not in use and before cleaning.
• Always keep cord away from heated surfaces.
• Do not leave appliance unattended when it is operating.
• Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been dropped or damaged in any manner.
• Use appliance only for its intended use. The use of attachments not sold or recommended by the manufacturer may cause hazards.
• Connect to properly grounded outlets only. See the Warnings and Important Information section above.
• Do not drop or insert any object into any opening or duct as this may cause an electrical hazard.
• Do not block air openings.
• Do not direct air flow toward eyes or other heat sensitive areas.

MAINTENANCE YOU CAN PERFORM:
(Before performing any of these maintenance actions, please ensure your
dryer is unplugged.)

• Remove air intake screen and use the blower end of a vacuum to remove as much hair and dirt as possible.
• BE VERY CAREFUL NOT TO STICK ANYTHING INTO THE DRYER.
• Clean as often as necessary.
• A reserve oil supply is sealed in the motor, thus eliminating the need for
  frequent oiling.
• After 12 months or 2,000 hours of operation, dryer should
  be lubricated.
• NOT ALL MOTORS REQUIRE OILING - PLEASE CONTACT SPEEDY
  DRYER FOR ASSISTANCE.
• To permit free movement of nozzle, place dryer in down position and put a few drops of oil in between the moving parts of the swivel.
• We recommend having your dryer serviced by the factory every 12 mos. More information is available at www.speedydryer.com/service.

IF THE DRYER ISN’T RUNNING PROPERLY:

• Make sure your appliance is securely plugged into a working outlet.
• Test the outlet by plugging in another appliance you know to be working.
• Make sure all breakers and switches are turned on.
• If the appliance is producing heat but not air, the motor may not be moving.
• Press the (red) motor reset button on the motor body.
• If the air flow is minimized, your dryer may be blocked and in need of cleaning.

STAND INSTRUCTIONS

• Install five (5) legs into the star base.
• Tighten bolts.
• Position dryer so nozzle and stem are in line with one another.
• Insert dryer stem into stand tube